IPG Photonics LightWELD Hand Held Laser Welding Machine
There are a few important things you should know before you buy a hand held laser welding machine. In this article, we will go over the main features of the LightWELD unit, its operation, and its performance. Read on to learn more! A hand held laser welding machine can be a great addition to your business, and you’ll be glad you did once you get started. Listed below are some of the top factors to look for when choosing a hand held laser welding machine.
LightWELD unit
The IPG Photonics LightWELD hand held laser welding machine has 74 preset welding modes. The unit comes with a wire feeder that feeds wire to the welding head as needed. The wire is precisely directed into the weld pool. The wire feed speed can be anywhere between 40 to 600 cm per minute. Wire diameters can range from 0.9 to 1.2 mm. For added convenience, the unit has a 10-second auto shut-off feature.
The LIGHTWELD hand held laser welding machine uses patented IPG fiber laser technologies to ensure superior performance and reduce labor costs. With its simple controls and 74 stored preset processes, the user can increase the productivity and quality of the weld. Compared to traditional welding methods, the LightWELD can be used to weld thin and thick metals. It also eliminates the need for welding fixtures and pre-cleaning the metal. The machine is capable of welding dissimilar thicknesses, as well as metals with high electrical conductivity.
High-end handheld laser welding machines are relatively expensive and can cost upwards of $15,000 – $25,000, depending on features. However, it is important to find one with all the parts, because the absence of a certain part can lead to poor results and cause major disruptions in the project. However, the benefits of the LightWELD laser welder far outweigh the price. This type of welding machine is capable of high-quality, accurate welds without the need for filler materials. Its control over various parameters allows the user to customize the welding process to suit their needs.
Laser welding does not require the metal to be as clean as MIG welding, but the LightWELD XC also offers multiple cleaning modes. The pre-cleaning mode is designed to prevent void formation and increase the consistency of the weld. Moreover, the optimized cleaning mode removes soot, weld related debris, and heat-induced discoloration. The LightWELD XC is easy to use.
LightWELD unit features
IPG Photonics Corp., a leading manufacturer of high-power fiber lasers and amplifiers, has launched the LightWELD hand held laser welding machine. This system features patented IPG fiber laser technologies, which enable fast and high-quality welding results with minimal heat input and filler wire. LightWELD features 74 process parameters, including the ability to weld thick metals with minimum distortion, undercut, and burn-through.
The LightWELD is simple to use, easy to setup, and provides consistent high-quality results. Whether you’re welding aluminum, steel, or stainless steel, LightWELD has the features and functions that you need. The LightWELD is also capable of welds on dissimilar metals, and it can weld parts of different thicknesses. In addition, the machine supports all types of weld joint.
A simple, intuitive interface and 74 stored preset process parameters help you optimize the welding process. These advanced features increase productivity and quality, and reduce labor costs. LightWELD’s processing capabilities make it an excellent choice for experienced welders who want to reduce labor costs and increase productivity. It welds thick, thin, and reflective metals with minimal distortion, undercut, and burn-through.
Aside from its high-quality and high-speed welding capabilities, the LightWELD hand held laser welding machine also features an easy-to-use control device and an adjustable spot for perfect weld seams. The GW air-cooled handheld laser welding machine is also easy to use, and the patented technology allows you to save frequently used parameters. You can customize the saved parameters with ease, making it easy for anyone to use. The machine also emits minimal amounts of noise.
LightWELD unit operation
The LightWELD XC hand held laser welding machine features multiple welding and cleaning modes. Pre-cleaning modes reduce the chance of void formation and help to improve consistency and repeatability. Optimized cleaning modes remove soot, heat-induced discoloration, and weld-related debris. Cleaning operations can be performed automatically or manually using an adjustable wobble frequency control. The LightWELD XC offers an easy to use, intuitive interface, and allows for the use of preprogrammed presets for both welding and cleaning.
When using a LightWELD unit, be sure to ground the welding gun. The ground cable creates a signal loop from the welding gun to the part. To turn on the laser, you must contact the part with the welding head. A two-step trigger makes this process easy. It is designed to prevent accidental welding. Once you’ve set up your machine, plug in your hand held laser welding machine and follow the instructions.
The LightWELD is an innovative handheld laser welding machine that combines welding and cleaning capabilities into one compact form factor. With a small footprint and air cooling, the LightWELD enables fast welding and easy operation, while delivering consistent, high-quality results in a wide range of materials. The laser technology is also highly efficient, requiring minimal heat input and providing aesthetic finishes with minimal or no filler wire. The LightWELD has 74 preset parameters for optimal weld results.
The LightWELD laser welding unit works best in vertical and upside-down welding. This machine allows you to weld in all directions without risk of overheating the parts. This laser welding machine uses a maximum of 1500 watts of laser power. The LightWELD unit is a highly versatile welding tool that works with any kind of weld joint. This makes it easy to weld metal and non-metal parts.
LightWELD unit performance
The LightWELD unit delivers enhanced weld performance on a hand held laser welding machine. Its laser welding parameters can be programmable for optimum performance, allowing you to weld various parts in any position. The weld width and frequency are adjustable to suit a variety of thicknesses and materials. In addition, the LightWELD unit supports a wide range of weld joint types.
The LightWELD system uses less heat, creating a smoother weld that is less likely to warp or cause distortion. It also welds a variety of materials, including thin and reflective metals with minimal distortion, undercut, and burn-through. The LightWELD 1500 offers increased weld time compared to other hand held laser welding machines, and allows users to weld parts that were previously unweldable. Users also report that LightWELD reduces the need for post-weld finishing.
Handheld laser welding machines are a convenient option for welds and cuts on a variety of materials. They can be used to weld stainless steel and mild steel, and are inexpensive compared to other types of laser welding machines. However, it is important to keep in mind that many models are not suitable for all applications. Therefore, it is vital to understand your specific needs before making a purchase.
Some laser welding machines are quite expensive and require custom fixtures and workbenches to be customized. Smaller companies may also manufacture similar models to larger brands, but are less expensive. In addition, you need to consider whether the manufacturer offers after-sales service. Some laser welding machine manufacturers send technicians to your site for setup and debugging, and make sure to contact them if you have a problem.
LightWELD unit price
The LightWELD hand held laser welding machine was introduced in late 2020. The new system is a big hit at FABTECH Chicago. In addition to replacing argon arc welding, the LightWELD 1500 has a built-in cleaning system that prevents slag and debris from getting on the workpiece. Its unit price is less than $1500. It is available in three different model configurations.
The unit is safe to use, with the wobble function offering a high level of precision. Its wobble setting allows the operator to achieve a decent weld on a part that doesn’t fit perfectly. The unit features a wobble-frequency control that lets the user adjust the weld width up to 5 mm. It can be aimed at the workpiece, and the wobble-frequency control helps the operator fine-tune the weld appearance.
The LightWELD is compact and lightweight, and its easy controls make it easier for users to use. It has 74 preset process parameters, including one that is user-defined. The laser-welding machine will save you a great deal of time on each weld because it reduces post-processing and welding fixtures. It also allows you to weld materials with dissimilar thicknesses with minimal undercuts, burn-through, or distortion.
The LightWELD 1500 is designed for easy setup and learning. Users report faster weld times and little or no post-weld finishing. The device is designed to weld both thick and thin metals with consistent results. It is also compatible with a wide range of thicknesses and materials. In fact, the unit is priced at $19,160 for its base system. If you are in the market for a new machine, this might be the perfect tool for you.
